For Flocculation Applications
The AquaCat Models are dewatering boxes with permanently mounted plastic filter media. The AquaCat is designed to be used with light gravity sludge and slurries made up of very fine particles that require the addition of a flocculent for effective dewatering.
AquaCats collect, dewater, transport and dump all kinds of sludges, slurries, and wet solids in a cost effective way.
Applications:
- Bio-solids dewatering
- Grease trap waste
- Septic tank waste
- Alum & ferric sludge
- Lagoon sludge
- Tailings pond sludge
- Fly ash
Self Dumping Hopper
- Heavy duty carbon steel construction (optional stainless steel)
- Designed to be handled by a standard fork truck
- Typical (2) 2” drain ports located at the bottom on each side at opposing ends
- Filter media covers the floor, walls, and is washable and removable
- Filter media comes in a choice of polypropylene or polyester
- Filter support panels made of expanded metal and perforated plates (optional materials available for support panels)
- A double wall filter element that splits the hopper into two compartments is an available option
- Dump Hopper sizes recommended: 3, 4, and 5 cubic yards
- Micron size filters from 600 microns to 300 microns (30 mesh to 50 mesh)
Front Loader
- Heavy duty carbon steel construction (optional stainless steel)
- Designed to be handled by a standard garbage truck
- Typical (2) 2” drain ports on the back wall
- Filter media covers the floor and walls
- Filter support panels made of expanded metal and perforated plate (optional materials for support panels)
- Micron size filters from 600 microns to 300 microns (30 mesh to 50 mesh)
- Optional double wall filters available
- Locked hard top available
- Front Loader sizes available: 2, 3, and 4 cubic yards
Roll Off
- Heavy duty carbon steel construction (optional stainless steel) 3/16” floor and 10 gage side walls with square bottom design, 6” x 2” x 1/4” bottom rails with steel wheels
- Gasketed, hinged water tight rear door
- Designed to be handled by a standard hook and cable type roll-off truck (hook lift type mechanisms optional)
- Typical (4) 3” drain ports located at the bottom on each side at opposing ends
- Filter support panels made of expanded metal and perforated plate (optional materials available for support panels)
- Filter media covers the floor, both side walls and both sides of installed center wall (optional door filter and front wall filter as well as a second double wall filter are available)
- Plastic filter media comes in a choice of micron sizes from 600 microns to 300 microns (30 mesh to 50 mesh)
- Container sizes available: 15, 20, 30, and 40 cubic yards