The E/One Sentry Protect Plus alarm panel is available for use with WX grinder pumps. The Protect Plus package provides advance warning of pending service needs by monitoring major operating conditions. A Trouble indication is provided when these conditions fall outside of normal ranges, although the grinder pump station may continue to operate.
E/One Sentry panels are supplied with audible and visual high level alarms. They are easily installed in accordance with relevant national and local codes.
The panel features a corrosion-proof, NEMA 4X-rated, thermoplastic enclosure. A padlock is provided to prevent unauthorized entry.
Protect Plus Features
The Protect Plus Package includes all of the features of the Basic configuration, including circuit breakers, 240 VAC service, terminal blocks and ground lugs, audible alarm with manual silence, manual run feature and run indicator, redundant “Start” function with high level alarm, safety front, conformal-coated board, overload protection.
Also included are all of the features of the Protect Package, including a Trouble indication that shuts down the pump temporarily in the event of an unacceptable operating condition (brownout, system over-pressure, run dry).
- Predictive status display module
- Pre-alarm indication for major operating parameters
- Alarm indications for major operating parameters
- Hour meter, cycle counter and alarm delay
- LCD display and user-friendly interface
- Inner cover (dead front)
- Contact group (dry, powered and Remote Sentry)
- Conformal-coated alarm board (both sides)