COVID-19

At Morrow Water Technologies, Inc., we value the health and safety of our employees, business partners, and the public. Morrow Water Technologies, Inc. has sought and will continue to seek alignment with the most current Centers for Disease Control and Prevention (CDC) guidance pertaining to coronavirus (COVID-19) precautions. We are currently open and are servicing customers in both our Birmingham and Mobile locations.

GeoCat

For Disposable Filter Applications

The GeoCat Models are dewatering boxes that use disposable filter media. The GeoCat is designed to be used with sticky, slimy, slightly oily, non-uniform, non-specific, colloidal, or simply hard to dewater sludge where flocculation is not an option. The GeoCat is also useful for dewatering operations in which the residual sludge cake would present a clean-up issue, as the disposable filter is discarded with the filter cake.

They are a cost effective way to collect, dewater, transport and dump all kinds of sludges, slurries, and wet solids.

Applications:

  • Water treatment plant sludge
  • Alum sludge
  • Gas scrubber ash
  • Arsenic/heavy metal sludge
  • Industrial plant waste streams
  • Food processing waste water
  • Chemical plant waste discharges
  • Vac truck waste
  • Various waste water applications

Self Dumping Hopper

  • Heavy duty carbon steel construction (optional stainless steel)
  • Designed to be handled by a standard fork truck
  • Typical (2) 2” drain ports located at the bottom on each side at opposing ends
  • Filter media is disposable but can be reused in certain situations
  • Filter support panels made of expanded metal and perforated plates (optional materials available for support panels)
  • Disposable filter media is available in 3, 4, 6, and 10 ounce fabric as well as a woven 40 mesh polypropylene filter and is made into an envelope shape, held in  place by bag hooks around the top perimeter of the hopper
  • A double wall filter element that splits the hopper into two compartments is an available option
  • Dump Hopper sizes recommended: 3, 4, and 5 cubic yards

Front Loader

  • Heavy duty carbon steel construction (optional stainless steel)
  • Designed to be handled by a standard garbage truck
  • Typical (2) 2” drain ports on the back wall
  • Expanded metal and perforated plate basket supports the filter media
  • Disposable filter media is available in 3, 4, 6, and 10 ounce fabric as well as woven 40 mesh polypropylene filter and is made into an envelope shape, held in place by bag hooks around the top perimeter of the container
  • Micron size filters from 600 microns to 300 microns (30 mesh to 50 mesh)
  • Optional double wall filters available
  • Locked hard top available
  • Front Loader sizes available: 2, 3, and 4 cubic yards

Roll Off

  • Heavy duty carbon steel construction (optional stainless steel) 1/4” floor and 3/16“ side walls with round bottom design, 6” x 2” x 1/4” bottom rails with steel wheels
  • Gasketed, hinged water tight rear door
  • Designed to be handled by a standard hook and cable type roll-off truck (hook lift type mechanisms optional)
  • Typical (4) 3” drain ports located at the bottom on each side at opposing ends
  • Steel expanded metal and perforated plate basket supports the filter media (optional materials for support panels)
  • A double wall filter element that splits the container into two compartments is an available option (more than one double filter is also an option)
  • Micron size filters from 3,360 microns to 170 microns (6 mesh to 80 mesh)
  • Container sizes available: 15, 20, 30, and 40 cubic yards