SERIES SLS2 Submersible Lift Station

APPLICATIONS

Waste Water

The Series SLS2 package stations are designed to handle raw sewage and other waste water entering a wet well from gravity-fed pipelines. The Series SLS2 is perfect for applications in which waste water must be transported down the line to a waste water treatment facility or at intermediate points where waste water must be moved to a higher elevation. This package is ideal for situations in which the wet well is provided by a third party and/or above-ground valves are required. Typical arrangements include two non-clog submersible sewage pumps mounted on guide rails which respond to controls based on water level inside the wet well.

BENEFITS

Proven Performance – Efficient designs coupled with high quality components have been proven in the field at hundreds of installations across the southeast

Operator Friendly – Above-ground valves and controls provide greater ease of use by eliminating the need to enter the wet well for some operation and maintenance actions

OPERATION

The SLS2 Series pre-engineered waste water lift station is designed to move raw waste water to a higher elevation for transport via gravity pipelines to a treatment facility. In automatic mode, controls respond to a call to run from float switch sources. An alternator selects a lead pump to run. If required, a second or lag pump can be activated. Any pump can be taken off-line for service while other pumps continue to respond to demands for water.

STANDARD FEATURES

• Heavy-duty continuous use submersible sewage pumps
• Above-ground isolation valves for each pump
• Above-ground check valves on discharge line for each pump
• Float switches
• High water level alarm
• U.L. listed 508 control panels
• Fiberglass building houses and protects above-ground equipment
• Fail-safe circuitry lets the second pump energize and take over the duty cycle if the first pump called to service fails due to overload
• Complete O&M manuals guide users through troubleshooting, servicing and spare/replacement parts selection

OPTIONS

• Solids handling or grinder pumps available
• Stainless steel or ductile iron piping
• Pump station enclosure options available

ENCLOSURES

The typical SLS2 package lift station includes an above-ground fiberglass enclosure which houses above-ground equipment, valves, and piping. Building dimensions and extra features vary depending on application requirements.